The VOLT GREEN BOOST MPPT 3000 BAYPASS solar converter is an advanced device
for directly supplying heating systems with energy from photovoltaic panels.
Thanks to the MPPT function, it ensures maximum energy efficiency, while the
BAYPASS system allows automatic switching to the mains in case of insufficient
energy production. The perfect solution for powering boilers, heaters, electric
mats and underfloor heating. The VOLT GREEN BOOST MPPT 3000 BAYPASS is a modern
solar converter that converts the direct current generated by photovoltaic
panels into alternating current, allowing direct powering of heating devices.
The MPPT (Maximum Power Point Tracking) system optimizes the operation of the
installation and maximizes the efficiency of energy conversion. Thanks to the
built-in BAYPASS function, the converter automatically switches to power from
the mains in case of a lack of energy supplied by the PV panels. This ensures
continuous heating operation even on days with low sunlight. For the device to
function properly, it is enough to connect 4 to 9 photovoltaic panels with a
power of 250W to 400W each. The panels can be configured both in series and in
series-parallel, thus adapting the installation to the user's conditions. The
VOLT GREEN BOOST MPPT 3000 BAYPASS solar inverter is ideal for powering:
Electric boilers Electric heaters Electric mats Radiators Underfloor heating The
device, thanks to its solid construction and numerous protections (overload,
short circuit, thermal), ensures long-term and trouble-free operation. Active
cooling and audible and visual warnings further increase user safety. Dual
output socket - Intelligent power management The converter is equipped with two
GB 3000 output sockets, which allow the connection of two heating devices
simultaneously. The first socket (PRIMARY) serves the main device and always has
power priority. The second outlet (SECONDARY) is activated automatically when
the device connected to the first outlet stops consuming power. If the load on
the PRIMARY outlet reappears, the power to the SECONDARY outlet will be
interrupted. In MPPT mode, the output voltage can range from 120V to 245V AC,
depending on the power obtained from the PV panels. In STABLE mode, the output
voltage is 230V AC with sufficient PV energy.