GIGABYTE Alaplap S1700 Z790 D AX INTEL Z790, ATX CPU LGA1700 socket: Support
for the 14th, 13th, and 12th Generation IntelŽ Core?, PentiumŽ Gold and CeleronŽ
Processors (Go to GIGABYTE's website for the latest CPU support list.) L3
cache varies with CPU Chipset IntelŽ Z790 Express Chipset Memory
14th and 13th Generation IntelŽ Core? i9/i7 Pocessors: - Support for DDR5
7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) /
6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600 / 5400 / 5200/
4800/4400 MT/s memory modules 13th Generation IntelŽ Core? i5/i3 and 12th
Generation IntelŽ Core?, PentiumŽ Gold and CeleronŽ Processors: - Support for
DDR5 4800/4400 MT/s memory modules 4 x DDR5 DIMM sockets supporting up to 192
GB (48 GB single DIMM capacity) of system memory Dual channel memory
architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate
in non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules Support for Extreme Memory Profile (XMP) memory modules (The CPU and
memory configuration may affect the supported memory types, data rate (speed),
and number of DRAM modules, please refer to Memory Support List on GIGABYTE's
website for more information.) Onboard Graphics Integrated Graphics
Processor-IntelŽ HD Graphics support: - 1 x HDMI port, supporting a maximum
resolution of 4096x2160@60 Hz * Support for HDMI 2.1 version and HDCP 2.3. **
Support for native HDMI 2.1 TMDS compatible ports. - 1 x DisplayPort,
supporting a maximum resolution of 4096x2304@60 Hz * Support for DisplayPort
1.2 version and HDCP 2.3 (Graphics specifications may vary depending on CPU
support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack using
the audio software. To configure 7.1-channel audio, access the audio software
for audio settings. Support for S/PDIF Out LAN RealtekŽ 2.5GbE LAN chip
(2.5 Gbps/1 Gbps/100 Mbps) Wireless Communication module IntelŽ Wi-Fi 6E
AX211 (PCB rev. 1.0) - WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier
frequency bands - BLUETOOTH 5.3 - Support for 11ax 160MHz wireless standard
(Actual data rate may vary depending on environment and equipment.)
Expansion Slots CPU: - 1 x PCI Express x16 slot, supporting PCIe 5.0 and
running at x16 (PCIEX16) * The PCIEX16 slot can only support a graphics card or
an NVMe SSD. If only one graphics card is to be installed, be sure to install it
in the PCIEX16 slot. Chipset: - 1 x PCI Express x16 slot, supporting PCIe 4.0
and running at x4 (PCIEX4) - 1 x PCI Express x16 slot, supporting PCIe 3.0 and
running at x1 (PCIEX1_4) - 2 x PCI Express x1 slots, supporting PCIe 3.0 and
running at x1 (PCIEX1_2, PCIEX1_3) Storage Interface CPU: - 1 x M.2
connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support)
(M2A_CPU) Chipset: - 1 x M.2 connectors (Socket 3, M key, type 2280 PCIe 4.0
x4/x2 SSD support) (M2P_SB) - 1 x M.2 connectors (Socket 3, M key, type 2280
SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) - 4 x SATA 6Gb/s connectors RAID
0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices RAID 0,
RAID 1, RAID 5, and RAID 10 support for SATA storage devices USB Chipset:
- 1 x USB Type-CŽ port on the back panel, with USB 3.2 Gen 2 support - 1 x USB
Type-CŽ port with USB 3.2 Gen 1 support, available through the internal USB
header - 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel - 6 x USB 3.2
Gen 1 ports (4 ports on the back panel, 2 ports available through the internal
USB header) - 2 x USB 2.0/1.1 ports on the back panel Chipset+USB 2.0 Hub: -
4 x USB 2.0/1.1 ports, available through the internal USB headers Internal
I/O Connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power
connectors 1 x CPU fan header 1 x CPU fan/water cooling pump header 3 x
system fan headers 1 x system fan/water cooling pump header 2 x addressable
LED strip headers 3 x M.2 Socket 3 connectors 4 x SATA 6Gb/s connectors 1 x
front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB
Type-CŽ header, with USB 3.2 Gen 1 support 1 x USB 3.2 Gen 1 header 2 x USB
2.0/1.1 headers 2 x Thunderbolt? add-in card connectors 1 x Trusted Platform
Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module
only) 1 x reset button 1 x Q-Flash Plus button 1 x reset jumper 1 x Clear
CMOS jumper Back Panel Connectors 1 x PS/2 keyboard/mouse port 1 x USB
Type-CŽ port, with USB 3.2 Gen 2 support 1 x USB 3.2 Gen 2 Type-A port (red) 4
x USB 3.2 Gen 1 ports 2 x USB 2.0/1.1 ports 2 x SMA antenna connectors (2T2R)
1 x HDMI port 1 x DisplayPort 1 x RJ-45 port 3 x audio jacks I/O
Controller iTEŽ I/O Controller Chip H/W Monitoring Voltage detection
Temperature detection Fan speed detection Water cooling flow rate detection
Fan fail warning Fan speed control * Whether the fan (pump) speed control
function is supported will depend on the fan (pump) you install. BIOS 1 x
256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM
BIOS 2.7, ACPI 5.0 Unique Features Support for GIGABYTE Control Center
(GCC) * Available applications in GCC may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard
specifications. Support for Q-Flash Support for Q-Flash Plus Support for
Smart Backup Bundled Software NortonŽ Internet Security (OEM version) LAN
bandwidth management software Operating System Support for Windows 11
64-bit Support for Windows 10 64-bit Form Factor ATX Form Factor; 30.5cm
x 24.4cm